RESOURCES & GUIDES
Learn more about our products (and how they can be integrated into your project) with these helpful resources.
Download our design files from CADdetails.com or ARCAT.com to quickly and easily incorporate products into your plans.
Our architectural line drawings and CAD drawings depict the three basic panel heights of our Envisor models, as well as our 1100 and 1300 series Covrit enclosures.
View all downloads:
These programs are developed specifically for design professionals to get manufacturer-specific product information into their project plans.
If you have questions about any of our downloadable drawings, or would like to request additional file types, contact one of our CityScapes project managers at 1-877-SCREENS, Monday to Friday, 8am to 5pm EST.
Envisor Roof Screens
-
Drawings
-
BIM / Revit
Start by downloading our design files from CADdetails.com or ARCAT.com.
BIM & Revit Models
Envisor Screen - RFA
Envisor Screens - RFA
SketchUp Models
Envisor Screen - SKP
Envisor Screens - SKP
DWGs
Envisor Screen - DWG
Envisor Screens - DWG
-
Specs
Envisor Specification Guide
Download PDF | Download Doc
-
Install Guides
-
Warranty
Envisor Standard Limited Warranty
Download PDF
-
Municipal Code Reference
-
Frequently Asked Questions
1. DO THE ENVISOR PRODUCTS HAVE ANY EFFECT ON THE WARRANTY OF THE EQUIPMENT THEY SCREEN?
We have not had any equipment manufacturer indicate the addition of Envisor screens will void their warranty. Additionally, we have worked closely with major suppliers to accommodate any concerns and gain their approvals.
2. IS AIRFLOW TO THE RTU IMPEDED BY THE ADDITION OF AN ENVISOR EQUIPMENT SCREEN?
No, our engineers design project-specific accommodations for any RTU performance features added to each piece of equipment.
3. WHAT ARE THE TYPES OF ENVISOR EQUIPMENT SCREENS CURRENTLY AVAILABLE?
Currently, two standard models are available: the Unit Attached System and the Post Mounted System. Both can screen RTUs from 2 ton to over 300 ton in size. We will also design and manufacture custom screens to fit your project.
4. CAN I SCREEN MULTIPLE PIECES OF EQUIPMENT ON A ROOFTOP TOGETHER?
Yes, however, the RTUs must be positioned close enough to each other to allow for “Twinning”, or the equipment may already be “nested” together on a steel substructure.
5. WHAT ARE THE PRODUCT’S WIND LOAD SPECIFICATIONS?
We have had a licensed engineer stamp product drawings to meet 180-mph wind load requirements with some product modifications. Generally, our engineers allow for an ultimate wind load of 115-mph.
Covrit Enclosures
-
Drawings
Covrit 11'x11' Single Dumpster Enclosure (Model 1111)
PDF
Covrit 11'x11' Single with Walk-In Dumpster Enclosure (Model 1111w)
PDF
Covrit 11'x11' Single with ADA Walk-In Dumpster Enclosure (Model 1111 ADA)
PDF
Covrit 11'x22' Double Dumpster Enclosure (Model 1122)
PDF
Covrit 13'x13' Single Dumpster Enclosure (Model 1313)
PDF
Covrit 13'x13' Single with Walk-In Dumpster Enclosure (Model 1313w)
PDF
Covrit 13'x13' Single with ADA Walk-In Dumpster Enclosure (Model 1313 ADA)
PDF
Covrit 13'x26' Double Dumpster Enclosure (Model 1326)
PDF
-
BIM / Revit
Start by downloading our design files from CADdetails.com or ARCAT.com.
Covrit Model 1111
RFA
SKP
DWG
Covrit Model 1111 Walk-In
RFA
SKP
DWG
Covrit Model 1111 ADA
RFA
SKP
DWG
Covrit Model 1313
RFA
SKP
DWG
Covrit Model 1313 Walk-In
RFA
SKP
DWG
Covrit Model 1313 ADA
RFA
SKP
DWG
Covrit Square Post
RFA
SKP
DWG
-
Specs
Covrit Specification Guide
Download PDF | Download Doc
-
Install Guides
-
Warranty
Covrit Standard Limited Warranty
Download PDF
-
Frequently Asked Questions
1. WHAT IS THE WIDEST SCREEN WALL SIZE I CAN ORDER?
It depends on which infill material you chose. Our Metal Series can span as wide as 6′ between posts. Woodgrain textured PVC infill is available up to 8’ wide in increments of 6”. Please contact us directly at 1-877-727-3367 with any unique requests and our design staff can quickly evaluate to provide answers or suggestions; usually within 48 hours.
2. WHAT IS YOUR AVERAGE DUMPSTER ENCLOSURE SIZE?
The most common size requested is an 11’ x 11’ x 7 or 8’ tall. This would hold most single dumpsters. For sites with two dumpsters, we see 11’ x 23’ x 8’ as the most specified.3. HOW TALL CAN MY ENCLOSURE BE?
Our typical screen walls and gates are less than 10′ tall but we have produced several projects up to 14′ tall. If you have a project that requires a wall or gate taller than 14′ please contact our project managers to discuss a custom order. We love a challenge.
4. CAN I CUSTOMIZE THE SIZE OF THE ENCLOSURE?
Yes, the entire line of CityScapes products can be made to your specifications. We begin with a selection of standard options to choose from, but if your needs are custom, we will work with you to identify the best options for your specific project. Most of our products are able to be re-sized in the field, so in many cases we can supply a standard sized part that can be trimmed on site to fit your specific project needs…just another one of the great advantages of CityScapes screening solutions.
5. CAN I GET MATERIAL/COLOR SAMPLES?
Yes, we are happy to send you hand-size samples of any color and/or product material design you choose. Simply contact us, request a sample and let us know what information you want to receive and where we can send it. Our team is ready to assist you.
ToughGate / MegaGate
-
Drawings
-
BIM / Revit
-
Specs
ToughGate Specification Guide
Download PDF | Download Doc
-
Install Guides
-
Warranty
-
Frequently Asked Questions
1. HOW WIDE CAN A TOUGHGATE BE?
Using a left or right hinge, the maximum free swinging gate width is 12′ wide. By using assist rollers on a smooth concrete surface under the gate swing path you can increase the maximum width of a single to 16′. Send us your specs and our project managers can help in assessing your needs. Contact us and provide your contact information, or call us at 1-877-727-3367, to get started on your project.
2. I HAVE EXISTING POSTS, CAN I REUSE THEM WITH YOUR TOUGHGATES?
Our unique gate hinge design works well with most existing steel poles for mounting. Simply provide the outside diameter pole dimension (inches), the on-center spacing (inches) between poles, and required door height and our project managers will guide you through the ordering process.
3. CAN YOU MATCH TOUGHGATE TO AN EXISTING STRUCTURE?
Our ToughGate materials are available in a variety of colors, We can also color match almost any shade requested. Contact us at 1-877-727-3367 with your color request and we can formulate a match. Contact us and provide your contact information, or call us at 1-877-727-3367, to get started on your project.
4. CAN YOU ADD A LOGO OR CUSTOM DESIGN TO TOUGHGATE?
Absolutely! We can produce gates with your own designs. Contact our project managers to discuss your ideas.
We advise that you research local code in your area to ensure custom designs are permitted at your site. Many municipal codes consider brand logos additional signage. While your design may not trigger a sign violation, customization should be understood in your area to avoid any issues.
5. DO YOU OFFER LOCKABLE GATES?
Yes, we offer gate latches designed to lock with your own padlock.
NatureScreen Trellises
-
Drawings
-
BIM / Revit
Start by downloading our design files from CADdetails.com or ARCAT.com.
CityScapes NatureScreen
Download
NatureScreen Post Mounted
Download
NatureScreen Wall Mounted
Download
-
Specs
NatureScreen Specification Guide
Download PDF | Download Doc
-
Install Guides
-
Warranty
-
Frequently Asked Questions
1. WHAT MATERIAL IS NATURESCREEN MADE OF?
Our systems consist of an aluminum frame and a variety of screen materials, depending on your need.
2. HOW IS NATURESCREEN INSTALLED?
We have both freestanding and wall mount designs. All instructions and mounting hardware are included in our product orders.
3. CAN I CHANGE VEGETATION/MATERIALS THAT ARE IN THE SCREEN?
You could remove current plant material and plant new, or manually weave new material throughout the steel during non-growing times of the year.
Planx Planters
-
Drawings
-
BIM / Revit
Start by downloading our design files from CADdetails.com or ARCAT.com.
Rectangle Planter
RFA
SKP
DWG
SQUARE Planter
RFA
SKP
DWG
2-Plank (H) Rectangle Elevated Planter
RFA
SKP
DWG
3-Plank (H) Rectangle Elevated Planter
RFA
SKP
DWG
3-Plank (H) SQUARE Elevated Planter
RFA
SKP
DWG
ADA Planter
RFA
SKP
DWG
Raised Bed
RFA
SKP
DWG
-
Specs
Planx Planters Specification Guide
Download PDF | Download Doc
-
Install Guides
-
Warranty
Planx Planters Standard Limited Warranty
Download PDF
-
Frequently Asked Questions
1. DO PLANX PLANTERS EXPAND OR CONTRACT?
The wood grain textured cellular planks used in our planters will expand and contract because of heat, unlike real wood which expands because of moisture. Our wall system design allows for expansion or contraction in the installation process.
2. WILL MY PLANX PLANTER FADE?
Our PVC panels will outperform wood and composite materials requiring no upkeep with minimal fading (warranty provided at time of purchase).
3. CAN YOU MATCH MY PLANX PLANTER TO MY BUILDING?
The wood grain textured cellular PVC used in our Planx planters comes in a variety of colors certain to complement your project site. While PVC products can be painted with water based paint, we do not recommend this as it will void the warranty. Posts and decorative aluminum stiffeners can be painted any color. Just provide a Sherwin Williams or Pantone code and we’ll match it.
4. CAN I GET SAMPLES OF PLANX PVC PANELS?
The wood grain textured cellular PVC used in our Planx planters is available in many colors. Our project managers will send you samples of any color you choose. Simply contact us, request a sample and let us know what information you want to receive and where we can send it. Our team is ready to assist you.
5. WILL MY PLANX PLANTER GROW MOLD OR MILDEW?
Our planters are composed of 100% cellular PVC which does not support mold or mildew growth. No moisture can penetrate into the material, which is one of the main reasons people love this product. Spores simply cannot take hold and penetrate the planks. However, if dirt or other debris is left on the wall for an extended period of time, that debris could grow mold and would simply need to be sprayed off.
6. DOES CITYSCAPES PRE-DRILL DRAINAGE HOLES IN OUR MOLDED SOIL TRAYS?
We typically do not pre-drill drainage holes in our molded soil trays unless we are installing a specific water system for the planters. However, when adding drainage holes, we recommend a 3/8” diameter hole, with the number of holes ranging from 2 to 6 depending on the size of the planter. It's crucial to prevent standing water from accumulating in the base, which could lead to root rot in plants. When installing planters on site, it's important to consider where the planter will drain. Simply adding random holes without proper planning could lead to the formation of a slippery, mossy mess on pavement, brickwork, or decks over the planting season.